135+ Workbench With Built-In Power Strip
atelier-yuwa.ciao.jp Introduction: The Ultimate DIY Workbench with Power Strip Tired of extension cords snaking across your workspace? This DIY workbench integrates a power strip directly into the design, providing convenient and safe power access right where you need it. This step-by-step guide will walk you through building a sturdy and functional workbench that will become the cornerstone of your workshop. Let's get started!
Materials and Tools Lumber: 4x4 posts (for legs) 2x4 framing lumber (for the frame and supports) Plywood or MDF (for the workbench top and shelf) Hardware: Wood screws of various lengths (1 1/4", 2 1/2", 3") Construction adhesive Pocket hole screws (optional, for extra strength) Lag bolts (for securing the legs) Power Strip: A heavy-duty power strip with multiple outlets and a surge protector Tools: Safety glasses Hearing protection Tape measure Pencil Circular saw or table saw Drill/Driver Pocket hole jig (optional) Clamps Sander Stain or paint (optional)
Step 1: Planning and Cutting the Lumber Before you begin, determine the desired dimensions of your workbench. Consider the available space in your workshop and the type of projects you'll be working on. A common size is 6 feet long, 30 inches deep, and 36 inches high. Cut the lumber according to your chosen dimensions. You'll need: four 4x4 legs, frame pieces (2x4s) for the top perimeter, support pieces (2x4s) for under the top, frame pieces for the lower shelf, and the plywood/MDF for the top and shelf. Make sure all cuts are square and accurate.
Step 2: Building the Workbench Frame Begin by constructing the top frame. Join the 2x4 frame pieces together using wood screws and construction adhesive. Ensure the frame is square by measuring the diagonals – they should be equal. Use clamps to hold the pieces together while the adhesive dries. Next, add the support pieces within the frame. These should be evenly spaced to provide ample support for the workbench top. Use screws and adhesive to attach them securely.
Step 3: Attaching the Legs Attach the 4x4 legs to the inside corners of the top frame. Use lag bolts and wood screws to ensure a strong and stable connection. Apply construction adhesive to the mating surfaces before fastening. It's crucial that the legs are perfectly plumb (vertical) for a level workbench. Use a level to check and adjust as needed.
Step 4: Building the Lower Shelf Frame Construct a second frame using 2x4 lumber to create the base for the lower shelf. The dimensions of this frame should be slightly smaller than the top frame to allow for easy installation between the legs. Use wood screws and construction adhesive to assemble the frame, ensuring it is square.
Step 5: Attaching the Lower Shelf Frame Attach the lower shelf frame to the legs at your desired height. A good height is typically 12-18 inches from the floor. Use wood screws and construction adhesive to secure the frame to the legs. Make sure the frame is level before fastening.
Step 6: Adding the Workbench Top and Shelf Cut the plywood or MDF to the size of the workbench top and lower shelf. Place the workbench top onto the top frame and secure it with wood screws. Countersink the screws to create a flush surface. Similarly, place the lower shelf onto the lower shelf frame and secure it with screws.
Step 7: Integrating the Power Strip Determine the location where you want to mount the power strip. A common location is along the back edge of the workbench top, or on one of the legs. Carefully measure and cut an opening in the workbench top (if mounting on the top) or attach it directly to the leg. Secure the power strip using screws or mounting hardware appropriate for the power strip housing. Ensure the power strip's cord is routed safely and won't be a tripping hazard. Consider using cable clamps to neatly organize the cord.
Step 8: Sanding and Finishing Sand all surfaces of the workbench to smooth out any rough edges or splinters. Start with a coarse grit sandpaper and gradually move to a finer grit. Once the surfaces are smooth, apply a stain or paint of your choice to protect the wood and enhance its appearance. Apply several coats of finish, allowing each coat to dry completely before applying the next.
Conclusion: Your Custom Workbench is Complete! Congratulations! You've successfully built a sturdy and functional workbench with a built-in power strip. This custom workbench will provide a safe and convenient workspace for all your future projects. Remember to always prioritize safety when working with power tools and electricity. Enjoy your new workbench!
Wood Workbench Kit Home Depot
freefurnitureplanner.blogspot.com Homak Garage Series 5 Ft. Industrial Steel Workbench With Cabinet Storage-gs00659031
www.homedepot.com Craftsman Stationary Work Bench: 29-1/2" Wide, 18" Deep, 40-1/4" High, Black Red 23167927 Msc
atelier-yuwa.ciao.jp
0 komentar:
Posting Komentar